Mechanical Splicer

The terminal of the cable can be used in two technologies: welding and cold bonding. The fiber cold connector is used when two pigtails are docked. The main component inside is a precision v-groove. After the two pigtails are used, the cold joints are used to realize the docking of the two pigtails. He is simpler and faster to operate, saving time than welding with a fusion splicer.Feature● Non-pre-embedded fiber structure● The reliability of fiber clamping is very good● Good stability and low insertion loss● Optical fiber quick-connect connector online tensile force has no effect on connection loss● The use cost is very low, the installation speed is very fastSPMS-AApplicable for | φ0.25 mm &φ0.90 mm fiberSize | 45*4.2*4.7mmOptical fiber diameter | 125μm ( 652 & 657 )Tight buffer diameter | 250μm & 900μmApplicable mode | single & multimodeOperation time | about 10s (without fiber cut)Insert loss | ≤ 0. 25 dB（1310nm & 1550nm )Return loss | ≤ -45dBFastening strength of naked fiber | >5 NClamping force of fiber with tight buffer | >8 NUsing temperature | -40 - +75 CReusability (10 times) | IL ≤ 0.2dB RL ≤ 5dBSPMS-BApplicable for | 3.1 x 2.0 mm drop cableSize | 90*7*8mmOptical fiber diameter | 125μm ( 657A & 657B )Tight buffer diameter | 250μm & 900μmApplicable mode | single & multimodeOperation time | about 30s (without fiber cut)Insert loss | ≤ 0.25dB（1310nm & 1550nm)Return loss | ≤ -45dBSuccess rate | >98%Reusability times | >10timesFastening strength of naked fiber | >5 NClamping force of fiber with tight buffer | >8 NTensile strength | >50 NUsing temperature | -40 - +75 COn-line tensile strength) | IL ≤ 0.2dBMechanical durability (500 times) | IL ≤ 0.2dBDrop off test ( 4 meters high, cement floor, three directions) | IL ≤ 0.2dBApplications● Optical line distributing frame● Fiber-optical network system● Hi-speed fiber-optical transmission systemRelated Articles● SC Fast Connector Assembly Instruction● The fiber optic connector common classification and characteristicsOrdering InformationPart Number | Product DescriptionSPMS-A | Fiber Optic Mechanical Splice applied to connect φ0.25--φ0.9 fiber/cableSPMS-B | Fiber Optic Mechanical Splice applicable for connecting 2.0X3.0mm drop cable